The mold structure cannot be laid out due to product space. When the conventional design cannot meet the product demoulding, the method of demoulding outside the machine shall be adopted to meet the overall structural requirements of the product.

Production process of die-casting products

For the service life of the mold, we should pay attention to regular maintenance. First of all, the administrator of the die casting mold must always supervise and maintain the mold condition, pay attention to more management details, and make maintenance records for future inquiry; Secondly, the storage of the die casting die shall ensure the consistency of the account, drawings, documents, etc. The die cannot be kept separately to avoid the loss of parts. The zinc alloy die casting die that has not been used for a long time shall be subject to anti rust treatment regularly. The new die shall be stress relieved as much as possible during the specified period to prolong its service life.

Tianchi Lake, also known as the sea floor, is also a compass. The Tianchi Lake of Fengshui Disc consists of thimble, magnetic needle, submarine line, cylindrical outer box and glass cover, which are fixed in the center of the inner disc. The center of the bottom surface of the round box is provided with a pointed thimble, and the center of the bottom surface of the magnetic needle is provided with a concave hole. The magnetic needle is placed on the thimble. The arrow of the compass points to the south and the other end points to the north. The bottom of Tianchi Lake is painted with a red line, which is called the seabed line. There are two red dots on both sides of the north end. When in use, the north end of the magnetic needle must coincide with the submarine line. The sea floor of the modern geomantic omen plate is painted with cross lines. When in use, the north end of the magnetic needle should point to the north end of the seabed cross line, and make the magnetic needle coincide with the north-south line of the seabed.

Fasten the parts and check whether the fastening parts are loose or damaged. If damaged, replace them with the same standard parts.